Getting Started!

We started by adding 3/4" plywood "rails" fastened using 1/4" x 20 bolts into "rivnuts" pressed into the ProMaster steel interior. Notice I applied thick duct tape on the side towards the steel interior to minimize squeaks when driving on the open road!

Here's the interior walls installed that divide the rear storage and bathroom. Walls fastened with simple steel "L" brackets to the interior structure, again using 1/4" x 20 bolts and rivnuts.

Showing our progress so far, rails installed on the walls and ceiling, rear divider wall in place and upper cabinet frames installed.